Yanhua Mini ACDP Read and write BMW DME ISN code when all keys lost.
Yanhua Mini ACDP Programming Master Read and write BMW DME ISN code when all keys lost NO need Soldering
Change a lot!
The first in the world
Tesla: NO longer needs engines
YANHUA: keys programming - NO longer need soldering iron
Locksmith: NO longer needs soldering work.
NO need soldering
Yanhua Mini ACDP Programming Tool Workable car models:
BMW CAS1, CAS2, CAS3, CAS3+, CAS4, CAS4+, FEM, BDC dashboard and Immobilizer.
Read BMW ISN code.
Read and write Fujitsu CPU MB91F dashboard of Honda/Hyundai/Kia etc.
Read and write all the 8pin IC chip.
Workable OS and devices:
Android phone with the Qualcomm chip
Note: The Huawei device doesn't work for the tool.
|Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP), and parts of Freescale / NEC MCU in circuit programming（ICP）. This module is a necessary basic configuration for other modules.
||(1) Support CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data.
(2) Support CAS4/CAS4+ IMMO key programming in circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data.
||Support FEM/BDC IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data.
||Read/write N20/N55/N13 ISN code via OBD.
Read/write MSV80/MSD85 ISN code without opening DME shell.
Read/write other DME ISN code by opening DME shell.
||Support erase/adjust mileage of 080DOWQ/T,160DOWQ/T EEPROM.
||Fujitsu CPU MB91F Module
||Support Fujitsu CPU MB91F (Honda Fit, KIA K3/K5, Sonata 9, etc.) Mileage adjustment.
||upport parts of VDO mileage adjustment of VW MQB platform via OBD,and Passat MMC (NEC D70F3525 + 95320) instrument adjustment after years 2015 by ICP mode.
||Refresh BMW key
|| Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly.
||FRM module (FRM Footwell module)
||Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.
Note: From SK247-1 to SK247-5, the package doesn't include the main unit. For the new user, you need to buy extra main unit (sk247), if you already have the main unit, just buy the authorization with adapter.
Programming with security: (No need solder anything yourself)
WIFI connection Free connection
1. Overturn the traditional work mode - Single operation is changed to team cooperation
2. Change the operation mode - PC operation is changed to mobile phone operation
3. Change the test connection mode - Electric soldering iron is changed to no-solder dedicated connector
4. Changed from artificial observation to intelligent monitoring Artificial observation / trying is changed to automatic detection algorithm, grap hical in dication the relability of connection. Ensure the data is not damayed and lost
5. Change the service mode - Offline service is changed to online synchronous service
No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin
1. Memory programming:
Support 93/24/25/35/95 series EEPROM in circuit (ICP)and on board(OBP)programming and parts of Freescale/ NEC MCU in circuit programming(ICP).
2. BMW module programming:
(1) Support cas1-cas4+ and FEM/BDC IMMO key programming, mileage reset, program recovery.
(2) BMW engine ECU data reading and ISN code reading
3. VW module programming: MMC instrument
4. Instrument mileage and airbag ECU reset/maintenance is under development.
5. BENZ. BMW Audi and various models are upgraded successively
1pc x BMW-N13 port board
Contact Information:Whatsapp: +86-159 0279 2245
1pc x N20 caliper for opening the hole of shell
1pc x N13 firmware
Live Support: Chat with us online
Skype: Sales@OBD360.comIf you have any problem, please do not hesitate to contact us.