Autel Maxidiag MD806 Pro scanner is a Combination of Autel MaxiCheck Pro and the Autel Maxidiag Elite MD802.MD806 Pro diagnostic scanner is an excellent tool for car repair shop owners, professional mechanics, and DIYer enthusiasts.
Autel MaxiDiag MD806 Pro Full-System OBD2 Diagnostic Tool Lifetime Update Online
Autel MaxiDiag MD806 Pro All System Diagnostic Functions:
1. OBD II Diagnostics:
Autel MaxiDiag MD806 Pro is built to take your diagnostic experience to a whole new level. Loaded with oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration functions, MD806 Pro can access ALL available modules for the best diagnosis operations.
Top Reasons to Get Autel MD806 Pro:
1.Muti-Function OBD2 Diagnostic Tool
2.Support Print Diagnostic reports
3.Support Multi-language: English, Traditional Chinese, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian, Greek, Simplified Chinese. Provide serial number to change language
4.1 Year Warranty
5.Lifetime Free Update
The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the drive train systems of OBD II vehicles.When more than one vehicle control module is detected by the scan tool,you will be prompted to select the module where the data may be retrieved.The most often to be selected are the Power-train Control Module [PCM] and Transmission Control Module [TCM].
Select this function to display the system status of the test vehicle, refer to the following description for the system status of the test vehicle.
1. OK – indicates that the monitor being checked has completed its diagnostic testing.
2. INC – indicates that the monitor being checked has not completed its diagnostic testing.
3. N/A – indicates that the monitor is not supported on that vehicle.
2. Read Codes:
Read Codes can be done with the key on engine off (KOEO) or with the key on engine running (KOER). This function is used to read the detailed information of a particular diagnostic trouble code for technicians to better solve the problem.
3. Erase Codes:
Erase Codes is performed with key on engine off (KOEO). This function is used to delete diagnostic trouble code when the fault the caused the specific DTC is fixed.
4. Record Data:
The Record Data function allows recording vehicle modules’ Parameter Identification (PID) data to help diagnose intermittent vehicle problems. You could save data files to the Micro SD card and then use the Playback function to view the saved files.
5. Freeze Frame:
Freeze Frame Data allows the technician to view the vehicle’s operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected.For example, the parameters may include engine speed (RPM), engine coolant temperature (ECT), or vehicle speed sensor (VSS) etc. This information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
6. I/M Readiness:
I/M Readiness function is used to check the operations of the Emission System on OBD II compliant vehicles. It is an excellent function to use prior to having a vehicle inspected for compliance to a state emission program.
7. O2 Monitor Test:
OBD II regulations set by SAE require the relevant vehicle monitors and tests on the oxygen (O2) sensors to identify problems related to fuel efficiency and vehicle emissions. These tests are not on-demand tests and they are done automatically when engine operating conditions are within specified limits. These test results are saved in the on-board computer's memory.
8. On-Board Monitor Test:
The On-Board Monitor Test is useful after servicing or after erasing a vehicle’s control module memory. The On-Board Monitor Test is used for non-CAN-equipped vehicles to retrieve and display test results for emission-related power train components and systems that are not continuously monitored. This function is also used for CAN-equipped vehicles to retrieve and display test results for emission-related power train components and systems that are continuously and non-continuously monitored. Test and components IDs are determined by the vehicle manufacturer.
9. Component Test:
The Component Test function allows initiating a leak test for the vehicle's EVAP system. The scan tool itself does not perform the leak test, but commands the vehicle's on-board computer to start the test. Different vehicle manufacturers might have different criteria and methods for stopping the test once it has been started. Before starting the Component Test, refer to the vehicle service manual for instructions to stop the test.
10. Vehicle Information:
The Vehicle Info. function enables retrieval of Vehicle Identification No.(VIN), Calibration ID Nos. (CINs), Calibration Verification Nos. (CVNs) and In-use Performance Tracking on 2000 and newer vehicles that support Mode 9.
11. Modules Present:
The Modules Present function allows viewing of the module IDs and communication protocols for OBD II modules in the vehicle.
12. DTC Lookup:
The DTC Lookup function allows user to search definitions of DTC stored in built-in DTC library
Autel MaxiDiag MD806 Pro Special Functions:
OLS - Oil Service Reset
BMS - Battery Registration & Reset
DPF - Diesel particulate service including forced regeneration
SAS - Reset steering angle sensor functionality
EPB - Relearn parking brake pad after replacement
Odometer - Reset service mileage and service intervals
The MaxiDiag MD806 Pro provide ABS, SRS (Airbag), Engine, Transmission, Oil Reset, EPB, DPF, SAS, BMS, Throttle and Adjust A/F functions for most modern vehicles on the road today. Select the Service function from the Main Menu to access the special functions.
1. Oil Reset:
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display and according to the recommended maintenance schedule.Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is change dprior to a service indicator being turned on, also reset the system.
This electric parking brake (EPB) function has a multitude of uses to maintain the electronic braking systems safely and effectively.
1). Ensure that you are fully familiar with the braking system and its operation before commencing any work.
2). The EPB control system may be required to be deactivated before carrying out any maintenance/diagnostic work on the brake system.This can be done from the tool menu.
3). Only carry out maintenance work when the vehicle is stationary and on level ground.
4). Ensure that the EPB control system is reactivated after the maintenance work has been completed.
Steering Angle Sensor Calibration permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM. Therefore, the front wheels and the steering wheel must be set exactly to the straight-ahead position before calibration. In addition, the vehicle identification number is also read from the instrument cluster and stored permanently in the steering angle sensor EEPROM. On successful completion of calibration, the steering angle sensor fault memory isautomatically cleared
The DPF function allows you to carry out numerous functions on the Diesel Particulate Filter system without having to send your car to a main dealer.The tool will manage DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
The BMS (Battery Management System) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, activate the rest state of the vehicle, and charge the battery via the diagnostic socket.
Autel MaxiDiag MD806 Pro Features:
1.Support Read/Clear Codes and Live Data functions for ALL systems.
2.Read and clear trouble codes, control, and test BMS/Oil Reset/ SRS/EPB/DPF systems.
3.Perform O2 monitor, on-board monitor, I/M readiness and component testing.
4.Global OBD II coverage for the U.S., Asian and European makes and models.
5.All OBD II protocols, all 10 test modes, and enhanced OBD II mode 6 support.
6.Print diagnostic reports via PC. Software lifetime free to update.
Autel MaxiDiag MD806 Pro Functions:
- Read & clear detected diagnostic trouble codes and turn off the Check Engine Light;
- Read I/M readiness status to have a vehicle inspected for state emissions compliance;
- View graphical live data of vehicle's computer module(s) for easy analyses;
- View the vehicle's operating parameters at the moment a DTC is detected;
- Show the last results of the O2 sensor test in the graphic display for troubleshooting;
- Read the results of on-board diagnostic monitoring tests for specific components/systems;
- Component Test: Allow initiating a leak test for the vehicle's EVAP system;
- Retrieve the vehicle information of VIN, CINs, and CVNs completely.
Autel MD806 Pro Wide Vehicle Coverage:
Autel MD806 Pro supports Global OBD II coverage for U.S. domestic, Asian and European makes and models. All OBD II protocols, all 10 test modes and enhanced OBD II mode 6 support.
- Oil Reset Service Coverage:
Asian For Acura, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Maruti Suzuki, Mazda, Mitsubishi, Nissan, Scion, Subaru, Suzuki, Toyota; AU Holden
European For Audi, Abarth, Alfa, BMW, Bentley, Benz, Bugatti, Citroen, Dacia, Fiat, Jaguar, Lancia, LandRover, MINI, Maybach, Opel, Peugeot, Porsche, Renault,Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volkswagen, Volvo
USA For Chrysler, Ford
Asian For Acura, Honda, Hyundai, Infiniti, Kia, Lexus, Nissan, Scion, Toyota
European For Audi, BMW, Bentley, Benz, Bugatti, Citroen, EU Ford, Jaguar, LandRover, MINI, Maybach, Opel, Peugeot, Porsche, Renault, Seat, Skoda, Vauxhall, Volkswagen, Volvo
USA For Chrysler, Ford
Asian For Acura, Honda, Hyundai, Infiniti, Kia, Lexus, Maruti Suzuki, Mitsubishi, Nissan, Scion, Subaru, Suzuki, Toyota, AU Holden
European For Audi, Abarth, Alfa, BMW, Bentley, Benz, Bugatti, Citroen, Dacia, EU Ford, Fiat, Jaguar, Lancia, LandRover, MINI, Maybach, Opel, Peugeot, Renault, Seat, Skoda, Vauxhall, Volkswagen, Volvo
USA For Chrysler, Ford, GM
Asian For Acura, Honda, Hyundai, Infiniti, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, Suzuki, Toyota
European For Audi, Abarth, Alfa, BMW, Bentley, Benz, Bugatti, Citroen, EU Ford, Fiat, Jaguar, Lancia, LandRover, MINI, Opel, Peugeot, Renault, Seat, Skoda, Sprinter, Vauxhall, Volkswagen, Volvo
USA For Chrysler, Ford, GM
Asian For Infiniti, Lexus, Mitsubishi, Nissan, Scion, Suzuki, Toyota
European For Audi, BMW, Bentley, Bugatti, Citroen, Jaguar, LandRover, MINI, Peugeot, Porsche, Seat, Skoda, Volkswagen, Volvo
USA For Ford
- Throttle Service Coverage:
Asian For Acura, Daewoo, HONDA, Hyundai, Infiniti, Kia, Lexus, Maruti Suzuki, Mazda, Mitsubishi, Nissan, Scion, Suzuki, Toyota, AU Holden
European For Audi, Abarth, Alfa, Bentley, Bugatti, Citroen, Dacia, Fiat, FordEU, Jaguar, Lancia, LandRover, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Vauxhall, Volkswagen
USA For Chrysler, Dodge, Ford, GM, Jeep
Autel MD806 Pro FAQs:
can u get transmission codes with this?
I have used it on a Kia Spectra to get transmission codes.
can this scanner program my keyless entry remote
No it is a basic code reader
Q3:Does this device require its own battery? I mean would you have to replace batteries in it?
It is powered by OBD2 DLC, the item itself do not have any battery
Does this already come with the cable and little pouch to carry it in?
It comes with cable. The cable goes into the same pouch as the instrument.
Does it work on Passat tfsi 2006
Supposed to work on anything 1996 and later.. but I don't know for sure about your car
Autel MD806 Pro Specification:
||ARM® Thumb® Processor running at up to 400 MHz
||32MB, 166 MHz
||4.0 inch LCD with 800x480 resolution
||Mini USB: 2.0 Micro SD Card (16GB)
||-10°C to 60°C (14°F to 140°F)
||-20°C to 70°C (-4°F to 158°F)
||5% - 95% non-condensing
||Strong plastic housing with protective rubber boot
||202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”)
||313 g (0.69 lb.)
Autel MD806 Pro Package List:
1x MD806 Pro Main Unit
1x User Manual
1x OBD II Cable
1x USB Cable
1x Micro SD Card
1x Quick Guide
1x Carry Case
Skype: Sales@OBD360.com Scan QRcode and shopping on phone easily
Scan whatsapp code and chat with me onlineIf you have any problem, please do not hesitate to contact us.
After-Sale Service(1)Shipping Warranty:
DHL: 3-5 days
UPS: 5-7 days
EMS: 10-15 working days
Regular Airmail: 7- 20 working days. At most 45 days.
Oversea warehouse: 2 to 5 days.
(2)Product Warranty: 1 year
One Year from the date equipment arrival
Repair and maintenance service for free within one year
Free technical support via internet or phone online
1. Damaged tool Service:
If the product you received has been damaged during the shipping, please report to local DHL office/Post office immediately and ask for damage proof, then contact our website customer service for exchange service.
2. Product Qulity problem for refund or exchange:
If the product has any problems, please contact customer service online within 7 days and return the item to us within 30 days upon the arrival.If you not contact us within 7 days and not return to us within 30days,
it is considered as used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT.
3. Return Service:
All returned items MUST BE in the original packaging and you need to provide us with the return tracking number, specific reason for the return, and also your order number. If the item needs repair, refund or exchange, please use simple airmail to ship back to us.
4. One-year warranty.
If the item need repair, within one year, customers no need pay repair fee but need to pay both back and forth shipping cost. Over one year warranty, customer need to pay repair fee.
|Main Unit for Equipment||1 year warrnaty|
|Machine peripheral equipments and wire||No warranty|
|Car diagnostic laptop||3 months|
|Data Hard Disk||No warranty|
|Car software||No warranty|