QUICKLYNKS BA101 Automotive 12V Vehicle Battery Tester is designed to test the condition of the automotive battery using conductance method. Unlike the conventional method of draining the battery by applying resistance load to it and obtain the result from the meter gauge; this analyzer utilizes a series of pulsed voltage across the battery cells and observes the AC current that flows in response to it.<br />
Brake Fluid Tester can be used as a digital tester which is suitable for determining brake fluid quality. It tests and indicates on five LEDs in terms of percent of water in the brake fluid.
All-Sun EM285 is the best electrical tester for reducing diagnostic time in automotive electrical systems.Connect this item with an automotive battery. And then the end of its probe will detect the positive or negative voltage through switch.
KOLSOL F02 Underground Cable Wire Locator Tracker Lan With Earphone
The latest BT100 12 Volt Automotive Battery Analyzer from Vident is dedicatedly developed to test 12V regular flooded, AGM flat plate, AGM spiral and gel batteries.
Vident iBT200 is used for lead-acid starting battery, testing the following conditions of the battery, cranking system and charging system. This tester supplies readings by a high resolution LCD display with great design of easy-to-use buttons operation, intelligent test methods and reverse polarity protection. It makes operation safe, clear and convenient. So this is the best tool in the fields of battery sales, vehicle repair and battery inspection in equipment system associated with lead-acid starting battery.
Check battery state on phone APP via Bluetooth 4.0 when device is installed
This Battery tester is designed to test the condition of the motorcycle battery using conductance method. Unlike the conventional method of draining the battery by applying resistance load to it and obtain the result from the meter gauge; this analyzer utilizes a series of pulsed voltage across the battery cells and observes the AC current that flows in response to it.
P200 SMART HOOK Powerful Probe, the new generation of intelligent circuit analyzer, is the only circuit tester that can be upgraded on the market. It can test all 9V-30V electronic systems quickly. The test time can be greatly shortened, making it more convenient, faster and smarter!
The MST-101 detector is using advanced technology from Germany, it can collect and analyze signals under non-dismantle automotive electrical parts, Testing results are showed by LED indicator and beeper. Easy to know if there is faults of the automotive electronic parts.
EM276 Injector Tester can diagnose injector problems, you can use it on each injector individually to test stuck, leaking or burnt-out.Used 12V vehicle battery as power supply.It has 4 pulse modes and in the continuous working mode (mode 4), it can help you identify the injector good or not when you switch off the engine.The lock mode can ensure the testing condition is same.It can work with any fuel pressure tester together.
CR508 not only can test rail pressure functions , acutally its similuation functions is very speical and very useful to our users (normally universal scanner only test but no simulation functions. <br />CR508 can be used for simulating oil pressure of high pressure fuel line, users can conveniently find and search problems on fuel line, fuel pump or sensor etc..
WOYO Remote Control Tester has been developed to assist with the diagnosis of all types of (IR) Infra Red and (RF) Radio Frequency remote controls. WOYO Remote Control Tester can be used on most makes and models of vehicles including trucks, remote control models and domestic appliances.
The Xtuner PT101 is developed by IDUTEX is the new revolutionary type circuit tester to users, with AVOmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester and bad ground indicator, provides great simplicity for users to check circuitry condition.