CGDI Prog BMW MSV80 is professional BMW CAS Key programmer: support all key lost, CAS Mileage Reset, FEM/BDC Key Match, EGS ISN, BMW F series program and coding, BMW enable key/disable key, ect. Update online
CGDI Prog BMW MSV80 Auto key programmer + Diagnosis tool+ IMMO maintenance 3 in 1
Top Reasons To Get CGDI Prog BMW MSV80:
1. Support Auto diagnose, programming and security maintenance 3 in 1.
2. Special for BMW Key Programming
3. Support BMW Key Programming with OBD Functions
4. Software response fast, short time programming, and new breakthrough in operation safety and technical support.
5. Supported Languages: English, Chinese
6. Certification: CCC,CE,GS, CCC,CE,GS,ISO
7. Warranty:1 year
8. Free Update Online on official website http://www.cgprogcar.com/?langid=en, when you receive the device, please download software on official website too.
Notice:
1. CGDI MSV80 BMW no need activation now, more convenient for customers.
2. If you need Reading 8 Foot Chip Free Clip Adapter, please pay for it alone!
CGDI MSV80 BMW Car Key Programmer CGDI Functions:
CGDI Prog BMW MSV80 Main Function: Auto diagnostic, Programming and Security maintenance
1.Update in real time, products updated in zero cycle time, support model added in real time.
2.BMW CAS3/CAS3+Data repair--support change replace and split CAS computer, BMW MSV80/MSV80.0/MSD80/MSD80.0/MSD85/engine
change computer, ISN code reading and writing.
3.Equipment security greatly enhanced, the hardware anti-crack, anti-software copy.
CGDI MSV80 BMW Car Key Programmer Supported Module list:
1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version
can be directly downgraded by OBD in 5 minus 100% safety.
2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.
3.Support BMW key inspection,can check key what status in.
4.Support BMW engine computer DME replacement.
CGDI Prog BMW MSV80 support Model list and working time:
Model |
Has key to match key |
Without key to match |
Read ISN code |
Replace engine computer DME |
BMW Key unkock |
Working time |
CAS1 |
support |
support |
|
|
support |
1 minute |
CAS2 |
support |
support |
support |
|
support |
1 minute |
CAS3 |
support |
support |
support |
|
support |
1 minute |
CAS3+ |
support |
support |
support |
|
support |
1 minute |
CAS4 |
support |
support |
support |
|
|
30 seconds |
CAS+ |
support |
support |
support |
|
|
30 seconds |
CGDI BMW V2.9.0 (2019.09.12) Update
1. Added French version
2. Added: B48 B58 read ISN
3. Added: MSD80/D81/D85/D87/MSV90 read ISN
4. Added: N13/N20/N55/B38 ISN read and write
5. F system code increases the function of modifying VO code
6. E system code brush hiding function to increase the search button
CGDI BMW V2.8.0 (2019.07.20)
1. Added Spanish version
2. BMW EGS Change: increase EGS_6HP
3. Fix E series programming E89, R56 car English version display problem; Increase the detection of foot space on programming CAS
4. Optimize BMW diagnostics, E system code interface
CGDI BMW Earth-shaking Update (2019/6/11)
1. Add BMW E-series refresh hidden function
2. Add BMW Diagnostics and support BMW E series, F series, G series DTC reading and clearing.
Tips on using CGDI Prog BMW MSV80:
CGDI MSV80 BMW no need activation now, more convenient for customers.
When you receive CGDI Prog BMW, you don't need to active by yourself, the factory engineers already activated that you can see on the screen top.
After the activation days expire, please click on the
"Settings " icon, then "Check for updates" shown as below.
There is no software cd coming with package, please download the cgdi prog bmw software on official website: http://www.cgprogcar.com/?langid=en
CGDI Prog BMW MSV80 Read MSV80 Specification:
Method 1: can read directly ISN code in the car,pls be assure car voltage is 12V above,directly connect OBD to operate--time about 5 minus.
Methods 2: can directly split engine computer (DME) to operate--connectline as follows:


MSV80/D80/D85/wiring in the experimental bench
CGDI BMW MV80 VS. Xhorse VVDI2
Option |
CGDI BMW MV80 |
VVDI2 BMW |
Appearance |
 |
 |
Price |
$655 |
$1129 |
EWS |
No |
Yes |
CAS |
Yes |
Yes |
FEM |
Yes |
Yes |
EDC |
Yes |
Yes |
Note 1: VVDI2 can work for old cars with EWS immo, incl. EWS1/EWS2/EWS3/EWS4
CGDI Prog cannot work for cars with EWS immobilizer systems.
Note 2: Both VVDI2 and CGDI Prog supports CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+
Yanhua Mini ACDP BMW vs CGDI BMW
Item |
Yanhua Mini ACDP BMW |
CGDI BMW |
Picture |
 |
 |
Highlights |
No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin |
OBD Key Program!
Run Faster!
Test a lot=Safety!
|
workable interface |
Mobile with Android or ios
PC |
PC or Laptop |
Connection |
WiFi Connection to Mobile |
WiFi Connection to PC |
Update |
Free and online update by scanning the QR Code
 |
Free update on http://www.cgprogcar.com |
Tokens |
No need tokens |
No need tokens |
Method |
OBD |
OBD |
Key Programming |
CAS1: Yes
CAS2: Yes
CAS3: Yes
CAS4: Yes
CAS4+: Yes
FEM/BDC: Yes |
CAS1: Yes
CAS2: Yes
CAS3: Yes
CAS4: Yes
CAS4+: Yes
FEM/BDC: Yes |
Odometer Correction |
Yes |
Yes
Pay for CGDI Prog BMW CAS Mileage Reset Authorization Service extra |
F series coding |
NO |
Yes
Pay for CGDI Prog BMW F Series Coding Authorization extra |
EGS ISN Coding |
NO |
Yes
Pay for CGDI Prog BMW EGS ISN Clear
and Synchronize Authorization extra |
Activation/Adapter |
ACDP need adapters to work with
You should buy different adapters for different functions
You can check Yanhua Mini ACDP here |
CGDI doesn't need adapter to work with
But you need another programmer to read
modules, need a cable to read DME ISN from MSV AND MSD |
How to Use CGDI BMW Programmer?
Here take programming FEM Smart Key for BMW F31 as example,and for the details with pics,click here.
Run CGDI PROG BMW software after finish all connection
Go to FEM/BDC key match
The current FEM BDC needs update the ECU program before performing key matching. Please ensure that the car battery has enough power. The programming process, please keep the equipment cable connection
Please remove the FEM BDC and then use the programmer to read and save data from the 95XXX EEPROM chip on FEM BDC computer board
Read the original car EEPROM data file
The 95128 EEPROM chip
Wait for CGDI BMW reading chip data
Save data
Use the programmer to write the calculated new data to the 95XXX EEPROM chip , then put the FEM BDC back into the car
Write M95128
Check the FEM connection
Voltage test platform is on
Use the programmer to write the calculated new data to the 95XXX EEPROM chip , then put the FEM BDC back into the car
The ECU is being programmed…
Again, write M95128
Again, write M95128
Voltage test platform should be on
Please remove the FEM BDC and then use the CGDI programmer to write the original car EEPROM data back to 95XXX EEPROM chip and FEM BDC back into the car
Coding is successful!!!!
CGDI Prog MSV80 Software Update Guide:
Step 1. Receive message " There is a new version", click on "OK"
Step 2. Click on "Setting", then "Check for updates", waiting until the next dialog box appears.
Step 3. Checking local file.
Step 4. Detects a new file, click "Yes" to update.
Step 5. Downloading file.
CGDI Prog MSV80 Firmware Update Gudie:
Step 1. Connect CGDI Pro device to the computer, open CGDI software.
Step 2. Click on "Setting" and then "Upgrade the firmware", waiting.
Step 3. Updating...
Step 4. CGDI programmer firmware update successfully, again click on "Upgrade the firmware".
Step 5. Get message reading " The version is already up to date without upgrading". Click on "OK".
CGDI BMW FAQs:
Q1: Does it add new keys for CAS4/CAS4+ via obd2 directly?
A1: No, you need depart it and read out the information with other programmer(Xhorse VVDI Prog) firstly, then use CGDI Prog BMW to generate keys.
Q2: I have got the CGDI BMW Prog package, but there is no software CD, could you send me download link
A2: Yes, here is CGDI BMW Prog Software Download Link, you can download it here
Q3: I want to know if the CGDI BMW can program used ECU?
A3: Yes, it can program used ECU, but you must make sure erase the used ecu firstly
Q4: Which mileage correction tool do you recommend for BMW CAS 2 3 4?
A4: You can choose CGDI Prog BMW or digimaster 3
Q5: I notice CGDI BMW Prog newly add some functions, while i do not have other cgdi product, how can i get the new function?
A5: You can buy Authorization alone.
For BMW F Series Coding - 36EUR
EGS ISN - 55EUR
CAS Mileage Reset - 31EUR
CGDI BMW Prog Test Report:
cas4 F10 – ok (new key)
cas4+ F10 – ok (new key) isn from org key or dump DME
fem/bdc F31 – ok – reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
CGDI PROG bmw f20 2014 mileage reset OK
Read ISN DME MSD80 OK 5WK93628
program bdc key via obd for bmw x6 ok!
add key to bmw x5 successfully
program key to 2016 BMW 5-series ok
program key for BMW 523Li OK
Program BMW FEM all key lost done!
program FEM for F30 328 2013 ok
programing orignal key for BMW 325 ok
add new key to BMW 3 series ok.
program bmw m3 key done!
Cas 2 - E60 2005 lost key - Obd - not working ( no option to program from dump)
Cas 3+ E87 2008 spare key - eeprom dump - ok
F10 - key from dump - OK
F10 LCI - key from dump and isn from working key - OK
F10 LCI - key from dump and isn from DDE - OK
E60 LCI - downgrade CAS3+ and key via OBD - OK
CGDI BMW Review:
Review 1:
Excellent tool so far. no bricks or problems.
extremely fast for cas1, 2 & 3
for cas3+ if need downgrade 10 minutes and seems safe, ISN read from DME 10 minutes does not support all DME is down side.
make sure you have proper power on the car
cas4 /+ did not check.
Review 2:
cas4 F10 - ok (new key)
cas4+ F10 - ok (new key) isn from org key or dump DME
fem/bdc F31 - ok - reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
Review 3:
I think the tool has come a long way from the time i purchased it.
Yes its not perfect, but is there such thing as a perfect tool.
I have cloned FEM units f20, F30.
I have made up a fem units for cars that had them missing.
I have done a good few cas 3+ downgrade mode no problems.
Using F coding and programming i have coded 2nd hand units to the car and then ista accepts it in programming plan,(Previously rejected in plan) (Rem, lights etc.).
I have had one or two unsupported errors, but with further investigation i find its uncommon processor.
Then not even R270 reads it i have to use X-Prog.
For me the CGDI has been a great investment.
The functions are growing, updates all the time.
CGDI Prog BMW MSV80 Package includes:
1pc x CGDI Prog BMW MSV80 Main unit
1pc x Adapter
1pc x USB line