FVCI is a PASS-THRU device of FCAR. It supports J2534 protocol, and it will support other protocol for free later. FVCI J2534 supports multiply communication manner of DOIP protocol, and it can setup Ethernet(tx_+, tx_-, rx_+, rx_-) and active line to any pin number of OBD2 except for ground pins and power pin.
FCAR FVCI PassThru J2534 Reflash/Diagnostics VCI
FVCI is a PASS-THRU device of FCAR. VCI use 3 ARM microcontrollers design, this will make the processing capacity of FVCI stronger and support OEM software better. It supports J2534 protocol, and it will support other protocol for free later. In addition, the hardware of FVCI supports multiply communication manner of DOIP protocol, and it can setup Ethernet(tx_+, tx_-, rx_+, rx_-) and active line to any pin number of OBD2 except for ground pins and power pin.
FVCI J2534 diagnostic and programming
Fcar FVCI Passthru specification:
- Three ARM microcontrollers.
- Three individual physical communication channels for protocols(CAN, single wire CAN, KWP, PWM, VPW, SCI and so on).
- Ethernet converts to OBD2 for DOIP protocol, the pins(tx_+, tx_-, rx_+, rx_-, active line) can set any pin number of OBD2 except for ground pins and power pin.
- Program voltage output between 5v and 20v.
- One Ethernet port.
- One analog input port.
FVCI J2534 support function
||Single wire CAN
||Ethernet port convert to OBD2
||Local area network of FVCI convert to OBD2
|Program voltage port
||1. Ethernet port to ODB2 interface for DOIP
||2. Ethernet port to local area network of FVCI
||15 pins analog input
||26 pins port communicate to vehicle
||Use for update firmware of FVCI
||12v power supply
JARGUR LANDROVER JLR SDD
Chrysler, Dodge, Jeep, Eagle, Plymouth
Ford, Lincoln, Mercury
FVCI Device interface
1) DC 12V/1A
2) Network port
3) USB port
4) Update pin, use for firmware update
5) Analog input
6) Programming voltage supply, 5V-20V, 120ma
7) Vehicle communication port
8) Device power status lamp
9) Software of device running status lamp
10) Vehicle communication status lamp
11) Network connection status lamp
12) USB connection status lamp
How to Update Fcar FVCI J2534 Passthru Software & Firmware?
Official website: www.fcar.com
1. Click “FVCI” icon on the desktop. Note: The computer must be connected to internet.
2. Click “Read Version” can read FVCI software and hardware version.
3. Click “Firmware Update” can update the hardware.
4. Click “Software Update” can update the software.
5. Click”DOIP”, then click “Enter DOIP mode”, the FVCI will enter the situation of Ethernet convert to OBD2 of DOIP.
6. Click ”Firmware Refresh” when you operate“firmware update” error.
1) Please enable internet connection before upgrade
2) The firmware version and software version must be the newest version meanwhile. Otherwise the device will appear some error.
3) If you use “Firmware update” failed, you can use “Firmware refresh”.
Skype: Sales@OBD360.com Scan QRcode and shopping on phone easily
Scan whatsapp code and chat with me onlineIf you have any problem, please do not hesitate to contact us.
After-Sale Service(1)Shipping Warranty:
DHL: 3-5 days
UPS: 5-7 days
EMS: 10-15 working days
Regular Airmail: 7- 20 working days. At most 45 days.
Oversea warehouse: 2 to 5 days.
(2)Product Warranty: 1 year
One Year from the date equipment arrival
Repair and maintenance service for free within one year
Free technical support via internet or phone online
1. Damaged tool Service:
If the product you received has been damaged during the shipping, please report to local DHL office/Post office immediately and ask for damage proof, then contact our website customer service for exchange service.
2. Product Qulity problem for refund or exchange:
If the product has any problems, please contact customer service online within 7 days and return the item to us within 30 days upon the arrival.If you not contact us within 7 days and not return to us within 30days,
it is considered as used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT.
3. Return Service:
All returned items MUST BE in the original packaging and you need to provide us with the return tracking number, specific reason for the return, and also your order number. If the item needs repair, refund or exchange, please use simple airmail to ship back to us.
4. One-year warranty.
If the item need repair, within one year, customers no need pay repair fee but need to pay both back and forth shipping cost. Over one year warranty, customer need to pay repair fee.
|Main Unit for Equipment||1 year warrnaty|
|Machine peripheral equipments and wire||No warranty|
|Car diagnostic laptop||3 months|
|Data Hard Disk||No warranty|
|Car software||No warranty|