HexTag Programmer is the latest BDM tool released by Microtronik which can do a wide range of operations in multi car brands. It can read the ECU’s D-flash and P-flash in fraction of seconds which is faster compared to any tool in the market.
Microtronik HexTag Programmer with BDM functions
HexTag Programmer with BDM functions (BMW CAS series, Porsche BCM, Audi/VW,...etc), Mileage EEPROM reset, Key reset, and more
Top advantages of HexTag Programmer:
1. Safety while using: Will not corrup the EEPROM or D-Flash from CAS4 and CAS4+. We can assure you that HexTag is the safest tool in the world.
2. Ease of usage: HexTag is considered the most user friendly tool, you can with a few clicks complete the most complicated jobs, like repairing a module (FRM3), resetting mileage, retrieving or modifying ISN, Change VIN,etc.
3. Competitive price for users even if compared to other tools.
Unlike most other tools HexTag takes care to the power supply for the connected control unit, the power monitoring system in HexTag monitors current and voltage supplied to the control unit which allows a very safe operation while reading/writing data. HexTag will shutdown power supply in a range of 10ms when it detectes a shortage or a high power consumption.
Using HexTag you can do the following:
1. HexTag ECU Cloning Function is free for 90 days only.
After 90 Days, ECU Cloning License will cost $1000, and $350 for annual update fee.
2. We offer one year warranty, while return for refund is not acceptable.
Read and write safely CAS2,CAS3, CAS3+, CAS4, CAS4+ all flashs without removing any component.
Read and write safely Porsche BCM without removing component
Repair corrupted EEPROM in CAS3+
Edit CAS3+ and CAS4 ISN and VIN
Reset mileage for CAS
Repair FRM in just one click
Read and write many other modules in different car models like Mercedes Benz, Audi, Land Rover, VW,..etc
Dashboard EEPROM Reset like M35080, 080D0WQ, 160D0WQ,...
Key Renew for many brands like Audi, BMW, Porsche, Land Rover, VW, Chrysler, Renault,...
This has an array of functions.
- Can be used as a Hitag key programmer with the Autohex HW4. Has improved antenna strength, works perfectly with Original and Chinese keys.
- Read , write , save , edit safely :
CAS2 with mask 2K79X/0L01Y
CAS 3 with mask 2K79X/0L01Y
CAS3 + with mask 0L15Y/0M23S
CAS4 with mask 1L15Y
CAS4 with mask 5M48H/1N35H – Secure and easy to read, unlocks within seconds
- Repair E series FRM with one click .
You can also do advanced functions.
Change Programming Mode
EWS EGS – Turn To Not Active
Change Power Class
Read DME/IGS ISN
Read DMW SK
Add Key directly to CAS
Change stored Vin
Read EGS ISN
Read ISN if not encrypted
Read SK (Secret Key)
- E Series FRM
Read and save eeprom/d-flash
Repair FRM stuck in emergency mode
- Support read/write other brands like Porsche BCM without removing any component, JLR KVM ECU, Audi/VW BCM, Mercedes Benz EZS and others.
- Dashboard EEPROM M35080, M35160, 080D0WQ, 160D0WQ reset in few seconds.
- Key Renew for many brands like Audi, BMW, MINI, Porsche, Nissan, Toyota, Fiat, Renault…etc.
New features are being updated in the near coming future.
Requires a Windows laptop running Windows 7 or Windows 10, a spare USB port.
Requires a 12V power supply.
Hextag can also be used as the key programming tool along with AutoHex software for making keys for BMW even when all keys lost.
HexTag Programmer Update Log:
- HexTag Programmer main unit
- BDM Cable (wires are same quality used in aerospace)
- Tricore Boot mode cable (For future added functions like Ecu clone)
- OBD Cable (For future added functions like Ecu tuning and making keys)
- Module/adapter for renew keys and read/write SOP-8 EEPROM
- SOP-8 High quailty Clip to read/write EEPROM and reset mileage on bench
HexProg Software Version 1.0.8
HexProg can clone Ecus, It's free for all users during 2019, any user has Hextag can start using this function now.
HexProg Software Version 1.0.6
- Porsche BCM 1N35H is more stable now
- EEPROM unlock function has been improved
- Audi key reset for ATJ807 is supported in this version
- BMW 315 HUF5662 key is supported in this version
- BMW China KeylessGo E Series is supported in this version
- BMW China 434 F Series is supported in this version
- Mini 315 Remote Data has been corrected
HexProg Software Version 1.0.5
- More Porsche keys added in HexProg Key renew list.
- Fixed EROM/EEPROM data for BMW VDO 868 MHz.
- M35080XX EEPROM chip now is fully supported for all parts and versions
- Key test function added to test renewed keys.
- An option to write E-EEPROM for damaged FRM is available in this version.
- Enhnaced user interface for future functions.
HexProg Software Version 1.0.5
- Land Rover new BCM read/write is available in this version of HexProg.
- Nissan, Infiniti and Renault BCM read/write is available in this version of HexProg
- Key renew for many brands: Audi, Cadilac, Dacia, Hyundai, Kia, Land Rover, Maserati, Peugeot, Renault and Volvo is available.
- Users can edit KOMBI Mileage for EEPROM Reset function.
- The Hexprog update procedure has been improved, users with slow internet connection can update without issues.
- Mileage modification in CAS4+ has been corrected, HexProg was unable to recognize the mileage in some cases.
- Key renew function for NXP PCF chips family is available in this version for BMW, MINI and Porsche. HexProg now solved the problem of FEM/BDC keys 434 MHz. Users with Production 1.50 they require HP 04-01 module for this function.
- EEPROM Read/Write of different types as well as resetting secured EEPROM Like 080D0XX, 160D0XX, M35080XX, and M35160XX (except WT mark). Users with Production 1.50 they require HP 04-01 module for this function.
- New BCM Porsche MASK (3M25J) added, users can read/write on this BCM without removing any component.
- Some Porsche BCM with MASK 5M48H/1N35H were able to read D-Flash and P-Flash but not write D-FLASH, a work around soultion added for such a case.
- Mileage for CAS4 and CAS4+ enhanced. In older release users can only set mileage to ZERO ,now they can set the value they like.
- Fixed some bug in FRM repair for cases were resulting fake failure.
HexProg Software Version 1.0.3
- Hexprog software First release after BETA is available for Hextag and hexprog tool users.
- New MCUs are supported like RENESAS V850 Family from NEC and HC08 Family from MOTOROLA/FREESCALE
- Added Porsche BCM 2011 and up, users can read/write data without removing any part.
- Added Audi/VW BCM for different modules: ESL J518 and BCM 2 with Renesas MCUs family
- More Mercedes Benz ESZ and EIS have been added.
- Fixed a false error message for FRM repair function after completing the eeprom repair.
- Supporting new Chinese keys in market for BMW E series (Hitag 2 protocol)
HexProg Software Version 1.0.2
Hexprog software (BETA) update is available for Hextag and hexprog tool users.
- Added FRM repair for BMW FRM in E series, this function will repair the corrupted EEPROM automatically
- Added new modeuls for BMW cars: SZL, SM, KBM
- Added a module for Mercedes benz: EIZ for 211 chassis
- Improved the performance of the software and fixing some minor bugs
Another explanation about the difference between HexProg and HexTag:
Both are identical, they differ only in this:
– HexTag can do key programming for BMW (currently it supports Hitag, Hitag2, Hitag Pro, and some other protocols).
– HexTag is to be sold only with Autohex II. HexProg can be sold to non Autohex II users.
Contact Information:Whatsapp: +86-152-7181-3909
Live Support: Chat with us online
If you have any problem, please do not hesitate to contact us.